Serving the Chattanooga area  ·  (423) 275-2115  ·  Open Mon-Sun 7am-7pm
📞 (423) 275-2115 Free Quote

Metal Roofing in Lakesite, TN (37379) · Local Professionals

Chattanooga Metal Roofing · Fast response in Lakesite and the Chattanooga area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Lakesite sits right on the Tennessee River, and the homes along the water take a beating from rain, sun, and storms. If you live off Lakesite Road or near the marina, you already know that a roof here has to handle more than just a few shingles.

We are Chattanooga Metal Roofing, and we have been helping homeowners in Lakesite (37379) and the surrounding Chattanooga area protect their homes with metal roofing that lasts. Whether you are in a lakefront house that needs corrosion-resistant standing seam or a brick ranch off Hixson Pike that needs a repair after a windstorm, our team knows the local conditions and the right materials for the job.

Metal Roofing in Lakesite (37379)

Lakesite is a mix of older lake homes, newer builds, and properties tucked into the wooded hills above the river. The humidity off the water and the heavy rainfall we get here mean that roofs are under constant pressure. We see a lot of failed fasteners, separated seams, and flashing gaps on older roofs, especially on homes that have been through storms like the 2011 tornadoes or the Easter 2020 outbreak. For lakefront properties, we recommend standing seam or stone-coated steel because they resist corrosion and hold up to wind-driven rain. The steep, wooded lots on the ridges also mean access can be tricky, and we plan for that with the right equipment and safety measures.

Our team has worked on everything from small cabins to large custom homes in the Lakesite area, and we understand the local building department requirements. We are fully insured with general liability and workers' compensation, and we are a Metal Roofing Alliance Member, so you know the work is done to industry standards.

Our services in Lakesite

How a Job Works in Lakesite

Step 1: You call us at (423) 275-2115 or request a free estimate online. We will schedule a time to come out and inspect your roof, discuss your options, and give you a written estimate. We will also check for any local permit requirements and explain the process.

Step 2: Once you approve the estimate, we order materials and schedule the work. For lakefront homes, we coordinate with you on access and staging, and we handle the permit application with the local building department. If you are in an HOA, we can help you get the necessary approvals for panel profile and color. The work itself typically takes a few days depending on the size and complexity of the roof, and we keep you informed at every step.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the property with you to make sure you are satisfied, and we provide a final invoice and warranty information. We do not consider the job complete until you are happy.

Pricing for metal roofing in Lakesite depends on the size of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer coatings starting at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. For a free estimate tailored to your home, call us at (423) 275-2115.

✅ Metal Roofing Alliance Member, licensed and insured for work in Lakesite and nearby areas.

Do you work on lakefront homes in Lakesite that need corrosion-resistant roofing?
Yes, we specialize in standing seam and stone-coated steel roofing for lakefront properties. The humidity and proximity to the water can accelerate corrosion on standard metal panels, so we recommend materials with protective coatings and proper fasteners. We have installed many roofs on homes along the Tennessee River in Lakesite and can advise you on the best option for your exposure.
How quickly can you respond to storm damage in Lakesite?
We offer free inspections for storm and wind damage and aim to respond within 24 to 48 hours for emergencies. If you have an active leak or a lifted panel, call us immediately at (423) 275-2115. We will tarp the area if needed and schedule a permanent repair as soon as possible, prioritizing safety and preventing further damage.
What is the typical cost for a metal roof repair in Lakesite?
Most repairs start at $450, but the final cost depends on the extent of the damage, the type of metal, and access. Leak repairs, flashing issues, and fastener replacement are common jobs we handle. We provide a written estimate before starting any work, so you know exactly what to expect.
Do I need a permit to replace my roof in Lakesite?
Yes, a roofing permit is typically required for a full replacement or re-roof in Lakesite. The requirements and fees are set by the local jurisdiction, and we can help you navigate the process. For specific details, you can check with the City of Lakesite through the Hamilton County website at https://www.hamiltontn.gov, or we can handle the permit application for you as part of our service.
My neighbor's tree hangs over my roof. What are my options if limbs damage my metal roof?
If a limb from a neighbor's tree falls on your roof, your insurance may cover the damage, and we can provide a detailed inspection report for your claim. We recommend discussing the tree with your neighbor to prevent future issues. If the tree is on your property, regular trimming can reduce the risk. We can also install snow guards or other protection if falling debris is a recurring problem.
Are you fully insured for roofing work in Lakesite?
Yes, we are fully insured with both general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the job. We are happy to provide a certificate of insurance upon request.
What kind of maintenance does a metal roof need in Lakesite's climate?
Metal roofs are low maintenance, but in Lakesite's humid and storm-prone climate, we recommend an annual inspection to check for loose fasteners, debris buildup, and any signs of wear. Cleaning gutters and removing leaves and branches from the roof are also important. We offer maintenance plans and can perform inspections to catch small issues before they become expensive repairs.
Why choose us?

Trusted professionals in Chattanooga

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chattanooga

All your work handled by qualified professionals in Chattanooga

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Chattanooga

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chattanooga · Response within 24h · No commitment · ☎ (423) 275-2115

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chattanooga ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm