Serving the Chattanooga area  ·  (423) 275-2115  ·  Open Mon-Sun 7am-7pm
📞 (423) 275-2115 Free Quote

Metal Roofing in Cleveland, TN (37311) · Local Professionals

Chattanooga Metal Roofing · Fast response in Cleveland and the Chattanooga area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Cleveland, Tennessee sits where the ridges start to roll toward the Tennessee River, and the housing stock tells that story block by block. You have older mill-era homes near downtown and the Greenway, mid-century brick ranches out toward Mouse Creek, and newer two-story subdivisions off Paul Huff Parkway and APD 40, plus working farms and barns on the outskirts toward Georgetown and Hopewell. That mix means one thing for roofs: heavy rain, summer hail, and the occasional wind event that peels back a panel or drives water past a tired fastener.

Homeowners in ZIP 37311 call Chattanooga Metal Roofing because we work this edge of the Chattanooga area regularly, not just when a storm makes the news. We know the difference between a 1950s ranch with three layers of shingles and a newer build that can take a standing seam retrofit, and we quote both honestly.

Metal Roofing in Cleveland (37311)

Cleveland's terrain is gentler than Lookout Mountain but not flat. Lots along Mouse Creek and the branches that feed it can hold water after a heavy rain, so we pay close attention to gutter sizing, downspout placement, and how water leaves the roof at the eaves. Older homes near downtown often have steep pitches and small lots, which means staging materials in the driveway and keeping the crew tight. Newer subdivisions off Paul Huff Parkway and APD 40 usually have HOA design rules, and we plan panel profile and color around those before we order anything. Out toward Georgetown and Hopewell, barns and farm shops need agricultural panels that handle heat, animal moisture, and wide spans without fuss.

Our team has installed, repaired, and replaced metal roofs across Cleveland and the surrounding Chattanooga area, from simple corrugated panel replacements to standing seam on a custom home. We are a Metal Roofing Alliance member and fully insured, with general liability and workers' compensation coverage on every job.

Our services in Cleveland

How a Job Works in Cleveland

Step 1: you call (423) 275-2115 or request a free estimate, and we set a time to walk the roof and the attic with you. We check fasteners, seams, flashing at chimneys and skylights, and how the gutters are handling runoff. You get a written scope and a clear price before anything gets ordered.

Step 2: we pull the permit through the City of Cleveland and coordinate any HOA approval if your subdivision requires it. On tight lots near downtown we stage panels carefully and protect landscaping. On farm buildings out toward Georgetown we work around livestock and equipment schedules. Installation includes new underlayment, proper flashing, and screw placement that matches the panel manufacturer's spec.

Step 3: we clean the site, run a magnet over the grass and driveway, and walk the finished roof with you. We do not leave until you have seen the work and know what to expect for maintenance.

Pricing in Cleveland depends on the roof, not a brochure. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts near $5.50, stone-coated steel and metal shingles around $9, and copper or specialty metal around $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, flashing and chimney work at $600, and gutters for metal roofs at about $9 per linear foot. Size, roof pitch, access, how many layers are already on the roof, and urgency all move the number. Call (423) 275-2115 for a free estimate on your specific property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Cleveland and nearby areas.

My house is near the Greenway in Cleveland and has two layers of old shingles. Can you install metal over them?
Sometimes, yes. Code limits how many existing layers a retrofit can cover, and we check the deck condition and local rules before recommending it. A metal roof over shingles starts around $7 per square foot, but if the deck is soft or the layers are already at the limit, a tear-off is the safer call. We will tell you which one your roof actually needs.
A storm just lifted panels on my roof off APD 40. How fast can you get out?
We treat active leaks and wind-lifted panels as priority calls in Cleveland. Call (423) 275-2115 and describe what you are seeing. We can often get out the same day or next to secure the roof and stop water from spreading, then schedule the permanent repair.
What does a typical metal roof replacement cost for a ranch home in Cleveland?
Most ranch homes in the 37311 area land somewhere in the range of $9 to $14 per square foot for a full replacement, depending on size, pitch, and how much flashing and trim is involved. A simple corrugated panel job can come in lower, and standing seam runs higher. We give you a written number after seeing the roof, not a phone guess.
Do I need a permit from the City of Cleveland for a metal roof?
In most cases a full replacement or re-roof requires a permit, and the rules vary by jurisdiction. Start with the City of Cleveland website to confirm what applies to your address, and we will handle the paperwork and inspections as part of the job. Never skip the permit, because it can complicate insurance and resale later.
My HOA has rules about roof color and panel style. Can you help with approval?
Yes. Several subdivisions around Cleveland require design review before a roof change. We provide panel profile, color samples, and manufacturer specs for your HOA packet, and we schedule installation after approval so you are not stuck with a roof your association will not accept. If your neighbor's property line is close, we also confirm setbacks before staging materials.
Are you insured for work on my Cleveland property?
We are fully insured, carrying both general liability and workers' compensation coverage. That protects you if anything goes wrong on the job. We are happy to provide proof of insurance before we start, and you should ask any contractor for the same.
What maintenance does a metal roof need in Cleveland's climate?
Cleveland gets heavy rain, summer heat, and occasional hail, so the main things to watch are fasteners, sealant at flashing, and debris in the gutters. We recommend an inspection after major storms and a check every couple of years on older roofs. Screw replacement and re-fastening start around $750, and catching a loose fastener early is much cheaper than repairing a leak later.
Why choose us?

Trusted professionals in Chattanooga

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chattanooga

All your work handled by qualified professionals in Chattanooga

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Chattanooga

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chattanooga · Response within 24h · No commitment · ☎ (423) 275-2115

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chattanooga ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm